Leyland P76 Owners 2005 |
Technical Information |
|
Auto's info for P76
Question
- Sunday, November 06, 2005
- Hi,
- the trani slipping like crazy(bloody borg warner 35)
- I'm hoping to put in a turbo 700 r4 when i get the time.
- For now is there a way to reajust the front bands without taking the trani out??
- cheers ,
- niko.
Reply
- Tue, 8 Nov 2005
- Bad news is you need to drop the pan to adjust the front band – but that’s all you have to do (so you can leave it in the car ) .
- The P76 workshop manual has one of the best sections on the BW-35 ever written .
- The “BW-35” trans are quite reasonable if serviced regularly and kept fed with cool trans fluid (very important) and the P76 V8 version is probably the strongest version made with extra clutches a larger internal main shaft etc .
- Later cars were to rehash the V8 P76 box again and call it the BW-40 .
- BW had concerns about the toque this new version of the box could absorb and the weak area around the bell housing bolts failing , so Leyland fitted the top braces and lower plate between the pan and housing to prevent the casing failure , later ’40 variants were to also have similar fittings in Fords etc.
- Having said that they are not designed for large horsepower or constant “harsh” use (heat usually kills them).
- Available 3 speed autos include the BW-65 as used in Rovers which is basically the ’35 with a redesigned case to make some things easier to fix but they are no stronger .
- The Rovers also used the GMH trimatic and so have a bell housing to suit a P76 ( they are stronger ) . and finally Range Rovers used a adaptor to fit a Valiant “Toque flight” and these are very strong .
- Alternatively , your present options for 4 speed autos are the early non computer controlled T-700 from GMH or you can use a “ZF” from a BMW using a BW-35 bell-housing and adaptor .
- BMW “ZF’s” are not as expensive as you think as many BMW’s had them and there is no real demand for them .
- Look around and you can find them for $250.00 .
- You need to create a tail shaft to suit and the rear mount is different (obviously) but you must use a electronic speedo as the ZF doesn’t have a speedo output at all.
- The ZF is the 4 speed auto also used in the late Range Rover’s but it has a very different output shaft and is mounted on a slight angle .
- All auto conversions are available from “The Rover Center” in Victoria (9782 2630)
- Hope all this helps , now where was that coma ……
- Rick
|
|
|
|
Last updated Feb, 2006 |
This web site may contain Copyright material
If you find any problems with the site, please email the
Web Editor |
|